Effects of jute fibre content on the mechanical and dynamic mechanical properties of the composites in structural applications

Due to notable characteristics, sustainability concept and environmental issues, hybridisation natural with synthetic fibres to fabricate composites have been rapidly gaining market share in different applications (structural, military, aerospace and automotive vehicles). Compression, tension and fatigue tests of various stacking sequences of plain jute/carbon reinforced (PVB) polyvinyl butyral by hot hydraulic press technique were experimentally conducted. Six types of fabricated composites with various constituents (jute, carbon and their hybrids) were fabricated and tested. Notably, fatigue lifetime of hybrids increases with increasing the carbon content relative to the jute fibre content. On the other hand, Jute composites possess high strain compared to pure carbon composite, which gives an overall improvement in mechanical behaviours. Interestingly, H1 hybrid with Carbon/Jute/Carbon sequences offers similar fatigue stiffness behaviour of H3 hybrid with Carbon/Jute/Carbon/Jute sequences when subjected to cyclic loading. Carbon composite (C) exhibited the highest fatigue resistance, whiles jute composite (J) possessed the highest strain and semi brittle trends in both mechanical and fatigue performance. Results concluded that plain jute fibres could partially replace high-cost synthetic carbon fibres to produce more eco-friendly hybrids to be utilised in different composites industries.     

断裂复合材料层压板贴片快速修复工艺研究

采用CMR-1A复合材料热补仪和3234/G814复合材料预浸料贴片,对完全断裂的复合材料层压板进行双面修复。通过正交试验法获得了最佳修复工艺参数:固化温度为130℃;固化时间为80 min;贴片层数为5层(单面);真空度为0.04 MPa;贴片长度为50 mm。对优化工艺参数进行试验验证,结果表明:复合材料层压板拉伸强度从0 MPa增加到320.84 MPa,提高了57.29%;LY12CZ铝合金和45钢板拉伸强度恢复率分别为96%和75.53%。     

FeAlCrNbB金属间化合物复合涂层的制备与表征

研究开发了一种FeAlCrNbB新型喷涂粉芯丝材,并结合自动化高速电弧喷涂工艺制备了该材料的复合涂层,分析了涂层的常规力学性能、组织结构和油润滑条件下的滑动摩擦磨损性能,并和常规FeAl涂层进行了对比。结果显示:FeAlCrNbB涂层具有相对较高的显微硬度和拉伸结合强度、低的孔隙率,组织致密,形成了由Fe-Al金属间化合物相、氧化物以及少量非晶和纳米晶组成的复合结构,由于这种复合结构的材料特征,使涂层具备较好的耐磨损性能。     

基于表层及芯材阻尼特性的夹层结构导纳分析

针对复合材料夹层板结构,综合开展芯材材料阻尼特性动力学热分析(DMTA)试验、表层玻璃钢和芯材试件阻尼衰减特性研究,通过夹层板结构的模态激振试验得到结构的模态阻尼比。从结构动力学方程出发探讨了影响多自由度系统结构传递导纳的相关参量,试验对比分析了钢质板和复合材料夹层板两型结构的传递导纳特性,并研究了激振点与响应点间距对复合材料夹层结构传递导纳的影响。研究表明:当尺寸和边界条件相同时,影响结构传递导纳的主要因素是结构的固有频率和模态阻尼。试验还得到了复合材料夹层板较钢质板的基频提高值和传递导纳降低均值,该试验结果可为工程设计提供参考。     

纤维缠绕复合材料管道等径三通的强度分析

根据复合材料强度准则中应用最广的Tsai—wu失效准则，利用ANSYS有限元分析软件，对纤维缠绕复合材料管道等径三通强度进行分析。分析结果表明，复合材料管道三通在承受内压时，在主管和支管的连接处会产生应力集中，纤维的缠绕方向不同三通的强度因子会各异，缠绕角在50°～60°时复合材料管道三通的强度最好，此结论可以为纤维缠绕复合材料管道三通的设计制造提供一种有效的参考。